A fiber optic vibration sensor based on SMF-MMF-SMF structure and a tilted fiber Bragg grating
Annotation
The paper proposes a version of realization for a fiber optic vibration sensor. The sensor possesses a wide range of operation frequencies with such interrogation devices as optical power meters. In comparison to spectral measuring complexes, the sensor imposes lower requirements on operating conditions. The authors investigated a sensing head based on a fiber SMF-MMF-SMF structure and a fiber Bragg grating inscribed in this structure. The external vibration frequency applied to the tested sensor structure is obtained using the Fourier transform of the signal received from the photodetector. The structure designed in this study with a fiber Bragg grating inscribed in it can be used as a sensing head of a fiber optic vibration sensor. It is demonstrated that the sensor based on the developed sensitive structure is able to obtain the external vibration frequency in the range of 20-9000 Hz with accuracy up to 1%. The research results are essential for monitoring systems for the state of structural elements of buildings and structures. The implementation of the vibration sensor in the format of a fiber optic device allows overcoming the limitations of piezoelectric sensors, providing high noise immunity and resistance to harsh environmental effects.
Keywords
Постоянный URL
Articles in current issue
- Aberration analysis of a wedge as a compensator element in augmented and virtual reality systems.
- Estimation of temperature detection delay in a fiber optic gyroscope sensing coil.
- The relative intensity noise of a vertical-cavity surface-emitting laser with a fiber Bragg grating external cavity
- A comparative analysis of the frequency spectra of the human eye and a cut diamond in visible light
- Vulnerabilities in the quantum key distribution system induced under a pulsed laser attack
- Proactive management of the composition and structure of the spatial monitoring system under the influence of destabilizing factors
- An algorithm of trajectory control for the movement of a mobile robot without measuring the position coordinates
- Different III-V semiconductor nanowires with quantum dots on silicon: growth by molecular-beam epitaxy and properties
- Impact of magnesium oxide concentration and yttrium-aluminum garnet stoichiometry deviation on the microstructure and optical transmission of YAG-based ceramics
- Measurements of heat capacity and thermal conductivity of β-Ga2O3 and β-(AlxGa1–x)2O3 bulk crystals grown by the Czochralski method
- An approach to the identification of the state of elements in cyber-physical systems based on principal component analysis
- Stochastic software testing for vulnerability analysis
- Research of machine learning methods in the problem of identification of blood cells
- An Enhanced Exploration and Exploitation of Modified Grey Wolf Optimizer for Fuzzy Rules Reduction in Cloud Intrusion Detection System (CIDS)
- Model of information interaction channel routing on the FANET network using fuzzy logic
- Bi-level authentication and mannequin routing for improving security features of WSN-IoT
- Spline-wavelet bent robust codes
- Social media user identity linkage by graphic content comparison
- Monte Carlo Concrete DropPath for epistemic uncertainty estimation in pollen images classification
- Random number generation with arrays of coupled quantum-dot micropillar lasers
- The method of forming and using a digital passport for an electronic product at enterprises of the instrument-making industry
- Methods for determining the phase difference of the output signals for the receiving elements of a phased antenna array in a radiophoton circuit with parallel and series pairwise connection ...
- Routing in networks of autonomous underwater vehicles